How to Use the One Hitter Dugout and Pipe

One Hitter Dugout Pipe Introduction

There is something wonderful about being prepared; ready to face the day, ready for anything. With smoking in mind, carrying around a bulky pipe or spending time pre-rolling isn't always an option, and they aren't the most convenient. However, for those of us who are always on the go, a pipe set is the perfect solution for those times when grabbing and going is of the utmost importance.

Typically a bench box is 3 to 5 inches tall with a space for a small pipe from a beater, a space for a cleaning tool, and another for your ground herb with a herb or tobacco grinder. This is an all-in-1 solution for traveling and pipe smoking on the go. Many are made from wood, while others are made from stone, metal, rosin, or acrylic.

Benches come in all colors and sizes, but the general format is standard; each dugout has a top that slides or rotates, but still stays attached to the unit so it doesn't get lost. Once you open the bench, you'll notice that it has three chambers or compartments inside; one is narrow and fits comfortably on a batsman, also sometimes referred to as a "bat," while the other is a larger space, also called a "shelter" intended to hold dry herb or tobacco. Most benches come with a cleaning tool that sits in a third space. The tool also serves to keep the top closed as it is fixed with a magnet. Also, most benches have a spring at the bottom of a beater's compartment, so the tube pops out for easy use.

Even one-beater pipes come in all shapes and sizes. Many are made of metal, while some are ceramic. Some are made to look like a cigarette, while others are colored or look like a brass mallet. Some choose ceramic over metal because they don't like smoking out of anything made of metal. This is where personal preferences come into play and there is certainly no wrong choice!

The design of the bench is so simple, it's ingenious. Easier than pre-rolling, simpler than carrying multiple pieces of gear with you. This innovative accessory is a must for all smokers who value their time and know how important it is to be prepared, not to mention organized and discreet.

Read on for a detailed description of this highly affordable smoking accessory.

pulling-dry-herbs-from-a-dugout-pipe-drug

pulling-dry-herbs-from-a-dugout-pipe-drug

Step by step guide to using a dugout canoe

Interested in learning how to use this incredibly cool tool? Follow along as we guide you step-by-step through the process of preparing, uploading and enjoying.

1. Grinding your weed is highly recommended when using a bench and hitter. While larger flowers are more attractive, you can fit much more dry herb into the bench if it's more finely ground. Also, and most importantly, dry herb will fit the pipe head much easier by a hitter, and the resulting high will be easier. Using an herb grinder if you have one, grind as much as you need to completely fill the bench compartment.

2. To easily fill the bench compartment, use a small piece of paper, such as a business card or other thicker piece of construction paper. Fold the paper in half and place the ground herb on top of it, in the crease. Now, carefully tip the folded card into the bench and swipe the grass until the bin is full. Be sure to push the weed down for a tighter package, but not too hard or else you won't be able to bring any of it back into your one hitter.

3. Now that your bench is loaded and ready to use, it's time to test your pipe from a batsman. Each beater has a small hollow cavity at the top that the dry herb fits into. To pack your one hitter, simply insert it, top to bottom, into the dugout. Press and twist simultaneously, filling the cavity. Make sure you apply some pressure while twisting, as you want the dry weed to completely fill the top of the one hitter so you can ensure at least one full hit while smoking. Trim it enough so the grass is taut but not too tight or lightening it will be a pain. Practice makes perfect with this step. You will find your balance.

4. The next and most important step is the best; i turn on! Take a minute to enjoy the flavor and the fact that your bench just made a quick smoke so much easier!

5. When it's time to repack, it's important to clean the top completely so there are no stray herbs sticking to the sides. Because it's so small, resin and bits of weed can collect pretty quickly inside the one hitter. Use the tool provided to clear the weed from the top of the pipe. Blow from the end of the mouthpiece to get rid of all particles.

6. Once done, you are ready to reload. Repeat the process as many times as you like or put away a hitter's pipe for another use later.

dry herbs in a dugout canoe

Tips for a hitter's bench

Here are some helpful tips when using a bench. While it's simple enough, there are a few things to know that can help you optimize your experience.

1. Using a grinder is the preferred method for using herbs with a bench. While we all love the beauty of a thick, nice bud, they don't really fit in the compartment and are extremely difficult to load into the top of a beater. A bench is all about convenience, and there's nothing convenient about having to pry a large bud out of the bench's compartment and then break it apart with your hands. When in doubt, grind! You'll be glad you did.

2. Keep your beater clean! It's the difference between a smooth, luxurious smoke and a frustrating, clogged, dirty tasting hit. At the end of a smoke session, be sure to use the cleaning tool included with the bench to clear out any remaining ash and herb residue. Blow from the mouthpiece to help loosen and remove the ash as well. Tap it as needed, but over time this can actually bend the sides and shrink the top of the tube. When you are at home, feel free to boil in hot water or soak in a cleaning solution for thorough cleaning.

3. Over time, the grass stored in the bench will compress and compress. Because grass can be super sticky, small chunks will build up along the sides and especially on the bottom of the bench. Use the tool provided to scrape the sides and bottom of your bench to loosen any stuck debris. This tip can be very helpful when your stash is low and you're looking for just a little more. A few simple scratches along the sides and bottom, and voila! Extra weed you didn't know you had!

cleaning-dry-weed-from-a-pipe-shot

Cleaning a pipe from a beater

Golden Rule #1: Keep your one hitter clean.

If your pipe isn't clean, not only will it taste quite nasty, but it can also get so clogged that you won't be able to draw any smokes, which will only leave you frustrated and disappointed.

All of the tubes in a beater, no matter what material they're made from, can be cleaned using a few different methods. It's important to note that these beaters are also quite convenient and affordable, so having a second one to use while another one is soaking isn't a bad idea.

In addition to using the cleaning tool after each use, take the time to clean your one beater regularly. There are a few ways to do this, some more dangerous than others, so be careful.

1. The most dangerous but cheap method is to immerse the pipe in boiling water for about 10 minutes and swirl it. This is the traditional and time-tested method that has worked for millions of smokers without any cleaning solution. It's a quick and easy way to remove dirt and debris for free.

2. This requires a few more items, but is safer. Fill a plastic zip-top bag with isopropyl alcohol or some other glass cleaner, enough to completely submerge the tube. Add about 3 tablespoons, if not more, of coarse table salt. Close the bag and shake vigorously for about a minute, then leave the pipe in the bag to soak for a few hours, or even overnight if you wish. When you pour the dirty brown liquid and rinse your pipe under some warm water to help clean it, you'll be amazed at how clean your pipe is.

smoking a dry herb pipe

The advantages of using a dugout canoe

A pirogue is and has been for years and years a point of reference for smokers from all over the world. Extremely versatile and suitable for practically anyone, a pirogue is a super discreet and portable way to enjoy a refreshing smoke anywhere, anytime.

Why choose a bench, you may ask? Well, the benefits are pretty obvious…

1. It's convenient. Everything you need is all packed into one small container. In fact, it's a 3-in-1 solution to all your smoking needs, meaning you have your weed, glass and silicone pipes and a cleaning tool all in one container.

2. It's simple. It's so easy to load, just by opening the lid, taking out the one beater, filling it with delicious herbs, and smoking.

3. It's discreet. At home or on the go, enjoying a quick smoke couldn't be easier. Load it up and smoke it. That's all. And, due to the size and design of a hitter's pipe, everyone will think you're just smoking a cigarette, if they notice anything! Plus, since everything is contained within the bench, say goodbye to unwanted smells, leaving you free to carry your bench in your pocket, purse or just about anywhere, without worrying about someone smelling your stash.

4. It's clean. Say goodbye to sticky fingers forever. Because you don't have to touch any of your herbs to pack your pipe, your fingers and hands stay clean and no extra flowers end up in your lap. Just pull out the one hitter, shove it into the herb-filled dugout chamber, twist, and smoke.

5. It is easy to clean. Using the tool provided, it's simple to just push the excess smoked herb or extra debris out of your beater. When soaking is needed, the process is quick and easy, leaving your batter sparkling

If you are someone who is ready for anything and knows the value of being prepared, you will love carrying a pirogue pipe. This portable and unobtrusive pipe set is perfect for anytime use. Everywhere. When you're carrying a pipe with you, you'll be ready for action in 5 seconds flat. Just take it out, pack it up and smoke.

搜索此博客

best2